Thinkware F70 Fleet Version

£139.00 inc. VAT

SKU: F70-fleet Category:

The Thinkware F70 Fleet Dash Cam has a Sony Exmor CMOS image sensor that captures Full HD 1080p video at 30fps, giving you a reliable witness in the event of an incident. A built-in Active Impact Monitoring system uses a 3-axis G-Sensor to monitor and differentiate incidents based on various recording modes. It comes with an additional Locking Box compared with the standard F70 to prevent tampering of the device by the driver/employee and the fleet manager will have a key to access what could be critical data/footage. It also comes with the GPS Antenna as standard along with it been the hardwire cable as standard.

 

Various autonomous parking modes:

Continuous Recording Mode
This mode is activated automatically when you start the engine. Recorded videos are saved in one-minute segments with an auto-looping mechanism.

Event Recording Mode
The Active Impact Monitoring System will automatically store the video data ten seconds prior to and after a collision registered by the 3-axis G-Sensor.

Manual Recording Mode
Similar to a video camera, you can use the Manual Recording Mode to capture events that occur in front of your vehicle whether or not it is in motion.


High-definition video quality

CMOS Image Sensors allow constant Full 1080p HD resolution recording during both daytime and night time along with a 140-degree wide angle lens view. This will minimize blind spots to assure recording of all events without fail.


Energy saving parking recording

Energy saving mode will reduce power consumption by 1/3 less and gives 3x longer video recording than normal parking mode. When you are away for a vacation or leaving your car for quite some time, energy saving parking recording is a recommended solution. When in use, the device will go to sleep and soon after an impact has been detection by built-in G-senor, it will wake up within a second and start recording for next 20 seconds of the period.


Safety camera alert

Exclusive safety feature from THINKWARE – The Safety Camera Alert function of THINKWARE DASH CAM actively alerts the driver of any photo enforcement locations on the route while still recording videos. THINKWARE Dash Cam provides an active warning for these 5 types of road safety cameras.

  • RED LIGHT WARNING SYSTEM
  • SPEED CAMERA WARNING SYSTEM
  • RED LIGHT & SPEED CAMERA WARNING SYSTEM
  • AVERAGE SPEED WARNING SYSTEM
  • MOBILE ZONE WARNING SYSTEM

Video enhancement technology

THINKWARE DASH CAMs are equipped with top-notch video enhancement technology on the market, ensuring the most vivid video recordings under any circumstance. Wide dynamic range when you are driving under bright sunlight, coming out of a tunnel, or getting under the shadow of a tall building etc, a sudden change in frontal light exposure levels can result in excessively bright or dark recordings. The WDR function eliminates excessively bright spots on the recording to correct its colour balance in order to ensure a clear image.


Night time picture quality correction

Images from the videos recorded during night time driving on dark streets are generally difficult to make out. The enhancement Sensors of THINKWARE DASH CAMs come with a standard function of brightness and colour control as well as noise cancellation.


Automatic exposure

A sudden rise of light exposure caused by strong sunlight or headlight beams of the oncoming vehicle may cause difficulties to assess the situation. Also, the lack of lighting in a dark tunnel or night driving may pose the same problem. The automatic light exposure function controls the level of light exposure to maintain vivid and clear video recordings in all circumstances.


Format free technology

F70 utilizes the FAT (File Allocation Table) system. This allows THINKWARE’s proprietary Format Free Technology to eliminate the need for periodical manual formatting of recorded video files on the microSD memory card. It also helps extend the life of your memory card. You can view recorded video files on any PC without having to worry about converting files. THINKWARE DASH CAM F70 saves the hassle of manually clearing memory space.


PC / Mac viewer

The intuitive and simple-to-use interface of THINKWARE DASH CAM allows you easy and convenient viewing of your recorded videos. Through PC or Mac viewer, you can playback and download recorded videos along with your route history and speed record. You can also change the dash cam settings, format the memory card, or install updates with just a few clicks on the viewer.


Comprehensive driving information with GPS

With the GPS Antenna, the THINKWARE DASH CAM F70 can record the vehicle’s driving speed and provide its precise location and routes identification on the map. The GPS Antenna helps you to accurately assess the details of the surrounding area by providing you with the vehicle speed and the time of a collision, and the severity of an impact. The video recording feature not only stores driving footages in case of an event, but it can also be used to track your holiday travel routes.


High temperature protection system

The specially designed heat discharge construction and the built-in thermal sensor of the F70 protect the device and its data against intense heat by automatically turning it off to prevent overheating.


Fail safe recording

In the event that the power gets disconnected after an accident, the fail-safe recording uses the Super Capacitor for backup power to ensure safe storage of any recording in progress – so you can be assured that your valuable data will be securely stored under any circumstances.